the figure, we offer several weathervanes. This old Russian weather vane: a crane with Kitaygorodskaya wall in Moscow, Deer from Rostov the Great, the winged horse Pegasus with the Crypt Monastery in Pskov. You can view them only as an idea. Figures can be very different: missiles, tanks, fish, aircraft, sailboats, cockerel.
To make a weathervane stock a few steel and tin strips, pipe diameter 15 - 20 mm rivets. Do not forget to cook brush and enamel paint.
first sketch on paper. The length of the "wing" each vane must not exceed 75 cm then cut out the silhouette and stick figure it on the sheet metal. And now you can cut it out of tin.
hardest part - to make and install a weathervane. The figure shows how the assembly of the simplest weathervanes. On the figure to the bar instead of the arrow (or right on it) is welded wing "- the so-called flyugarku.
Rod - a metal with a diameter 10 mm, with a pointed end. Sharp end, insert it into the tube with a larger diameter, so that it rotates freely within it. At the lower end of its solder metal pin. It rests on an edge of the ridge. In the tube pour a little lube. At the top of the tube will strengthen the puck, which are soldered to the arrows indicating the parts of the world. Do not forget to put on a metal rod circle pad that will protect the tank for the oil from the rain. Cover figure enamel paint and insert the rod into the tube. Now fasten weathervane on the ridge, as shown in the figure, and you can install it on the roof.
0 comments:
Post a Comment